Laserfiche WebLink
1 <br />2 <br />3 <br />4 <br />5 <br />6 <br />7 <br />8 <br />9 <br />10 <br />11 <br />12 <br />13 <br />14 <br />15 <br />16 <br />17 <br />18 <br />19 <br />20 <br />21 <br />22 <br />23 <br />24 <br />25 <br />26 <br />27 <br />28 <br />"(b) Conductor Material. Conductors in this article shall be <br />aluminum or copper. Conductors smaller than #2 AWG <br />shall be copper only." <br />ection 310-14 is added to read as follows: <br />"Aluminum conductors smaller than No. 6 shall not be used for <br />circuit conductors, feeders, or subfeeders." <br />he following change is made to the "Uniform Building Code," 1988 <br />dition: <br />hapters 26 and 29 are amended to read as follows: <br />"Reenforcement for columns A. Vertical reenforcement. The <br />area of vertical reenforcement shall be not less than .005 Ae <br />and not more than 0.04 Ae. At least four No. 3 bars shall be <br />provided." <br />hapters 26 and 29 are amended to require the following in all <br />ingle family and multi -family residential slabs: <br />"(a) wire mesh 10-10 gauge; (b) vapor barrier .006 mil.; and <br />(c) recompaction of all plumbing trenches to meet <br />original compacting requirements. <br />hapter 47 is amended to require wire backing for stucco mesh to <br />e fastened on every other vertical member, not to exceed 32 <br />nches on center (this does not apply to prefabricated wire mesh). <br />hapters 26 and 29 are amended to require the following: <br />"For 2 -story residential and commercial buildings, a minimum <br />of #4 rebar top and bottom to be run continuously in the <br />footing." <br />hapter 4 of the Uniform Code for the abatement of dangerous <br />uildings are amended to add the requirement that notice of <br />roceedings to abate substandard buildings that do not present <br />-3- <br />