Laserfiche WebLink
1 <br />2 <br />3 <br />4 <br />5 <br />6 <br />7 <br />8 <br />9 <br />10 <br />11 <br />12 <br />13 <br />14 <br />15 <br />16 <br />17 <br />18 <br />19 <br />20 <br />21 <br />22 <br />23 <br />24 <br />25 <br />26 <br />27 <br />28 <br />2. No more than 1 dwelling unit per 20,000 square feet on slopes of less <br />than 20%. <br />3. No more than 1 dwelling unit per 40 acres on slopes greater than 30% <br />slope <br />Density transfers to land with slopes of less than 30% is encouraged in order to <br />retain the overall open character of the open space land. No development will be <br />permitted on land with slopes greater than 31 % when density transfers have been <br />granted to transfer the density that is otherwise allowed on such land to land <br />containing slopes that are less than 30%." <br />5.3.2.1 Permitted Densities in Planning Area Nine (A) <br />"In addition to the density range identified on Table 2A, maximum densities <br />permitted are as follows: <br />1. No more than 1 dwelling unit per acre on slopes between 31 % and 1:1 <br />slope. <br />2. No more than 1.5 dwelling units per acre on slopes between 20% and <br />30%. <br />3. No more than 1 dwelling unit per 20,000 square feet on slopes of less <br />than 20%." <br />112. Section 6.1.1 at page 72 is hereby amended to read as follows: <br />"Landform Grading <br />On all natural slopes greater than 5 feet in height that require grading, landform <br />grading (contour grading) shall be encouraged to simulate the appearance of the <br />natural terrain. (Figures 16 and 17). <br />Graded areas should blend with the natural terrain by avoiding abrupt changes in <br />grade and by rounding off sharp angles at the top, toe and side of all cut and fill <br />I RIVPUB/MXM/645664 <br />9 <br />