2002 AGN SEP 04 I03 - Laserfiche WebLink

Browse Search

Item #3 ORDINANCE NO. 414 1 1 2 AN ORDINANCE OF THE OF THE CITY COUNCIL OF THE 3 CITY OF COLTON AMENDING SECTION 18.12.090 OF THE 4 COLTON MUNICIPAL CODE RELATING TO MAXIMUM BUILDING COVERAGE IN THE R-1 (SINGLE FAMILY 5 RESIDENTIAL) ZONE: FILE INDEX NO. DT -44-01. 6 7 WHEREAS, the City Council of the City of Colton (the "City Council") held a duly 8 noticed public hearing on August 21, 2001, after giving published notice, of an amendment to Section 9 18.12.090 of the Colton Municipal Code relating to maximum building coverage in the R-1 (Single Family Residential) zone (the "Zone Text Amendment"); and 10 11 WHEREAS, on July 24, 2001, the Planning Commission of the City of Colton 12 ("Planning Commission") also conducted a duly noticed public hearing on the Zone Text Amendment at which time all persons wishing to testify in connection with the Zone Text Amendment were heard 13 and the Zone Test Amendment was comprehensively reviewed and recommended for approval; and 14 WHEREAS, the City Council has determined that the Zone Text Amendment is 15 consistent with the City of Colton General Plan as indicated below; and 16 WHEREAS, the City Council has determined that the proposed Zone Text 17 Amendment is in the best interests of the City, promotes the public health, safety and welfare of the 18 community and would be in the public interest to approve the Zone Text Amendment; 19 WHEREAS, the Application was reviewed, studied, and found exempt from the 20 California Environmental Quality Act ("CEQA') as more fully described below; and 21 WHEREAS, all other legal prerequisites to the adoption of this Ordinance have 22 occurred. 23 NOW, THEREFORE, BE IT ORDAINED BY THE CITY COUNCIL OF THE 24 CITY OF COLTON: 25 SECTION 1. Section 18.12.090 of the Colton Municipal Code is hereby amended 26 to read as follows: 27 "The maximum lot coverage of all buildings on R-1 Single Family Residential zoned 28 lots shall not exceed forty percent (40%) of the total lot area, combined total square footage of main structure and accessory structures. The square footage is calculated on the footprint of the first floor